Engine Air Intake Inspection; Pvt Air Intake Inspection - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

2. Unhook the two clips

remove cover. Inspect the cover seal. It should

adhere tightly to the cover.

3. Remove the air filter assembly. Inspect the air filter

and replace if necessary.

If the filter has been soaked with fuel or oil it must be

replaced. Do not attempt to wash the air filter. If

cleaning is required, replace the filter.

Installation

from airbox cover and

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

4. Clean airbox of any oil or water deposits and apply a

small amount of grease to the sealing surfaces of the

5. Reinstall the air filter into the airbox container. Be

sure the filter fits tightly in the air box and engage the

ENGINE AIR INTAKE INSPECTION

1. Remove the cover from the outer side of the seat

and remove the pre-filter element.

2. If the pre-filter element is dirty, clean it with hot,

soapy water. Rinse and dry the filter element

thoroughly. Inspect element for tears or damage.

Replace if necessary.

3. Reinstall the pre-filter element into the seat frame

and install the cover.

1. Remove the PVT intake cover

2. Verify there is no debris obstructing the airway.

3. Reinstall the cover.

Table of Contents