Headlights; Headlight Adjustment - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

HEADLIGHTS

The headlights are adjustable.

1. Place the vehicle on a level surface with the

headlight approximately 25 ft. (7.6 m) (Item 1) from a

2. Measure the distance from the floor to the center of

the headlight (X

) and make a mark on the wall at the

same height (X

3. With the machine in Park and wheels chocked, start

the engine and turn the headlight switch on.

4. The most intense part of the headlight beam should

be aimed 8 in. (20 cm) (item 2) below the mark

placed on the wall in Step 2.

Rider weight must be included in the seat while

performing this procedure.

5. Locate the T25 Torx-head adjustment screw through

the wheel well (see illustration). Adjust the beam to

the desired position by loosening the adjustment

screw and moving the lamp to the appropriate

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

6. Once the beam is set to the position, tighten the

adjustment screw. Repeat the procedure to adjust

the other headlight.

Due to the nature of light utility vehicles and where they

are operated, headlight lenses become dirty. Frequent

washing is necessary to maintain lighting quality. Riding

with poor lighting can result in severe injury or death.

Table of Contents