Polaris RANGER ETX 2015 Owner's Manual page 129

6. Install the Clutch Center Distance Tool (PU-50658 or
PU-50658-A) onto the crankshaft and transmission
input shaft. The pictures below show a properly
installed tool (PU-50658).
NOTE
Images for Reference only. The tool shown should only
be used to check center to center distance.
The location the tool rests on the shafts may vary.
PU-50658–A
HOLE YEAR VEHICLE DESCRIPTION
1 2012
2011-14
2 2014-15
2013
2014-16
2015-18
2015-16
3
2013–18
2014–18
2015-18
4 2014-18
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
RZR 570
RZR 900
RZR XP 1000
RANGER 900
ACE
ACE 570
RGR ETX
RZR 570
RANGER 500/570
RANGER 570 Full-Size
RANGER 900/1000
ENGINE / COOLING SYSTEM
YEAR
HOLE
2015-18
2016-18
2016–18
5 2015-18
i.e. 2015 RZR 900 uses the holes marked with a
7. Torque the upper, then lower engine to transmission
adapter take up nuts (4) counterclockwise to
specification. Repeat the Step 7 process.
TORQUE
Engine to Transmission Coupler Take Up Nut:
60 in-lbs (6.7 Nm)
8. Fully insert the NEW engine to transmission coupler
bolts (3). Install NEW washers (5) and torque NEW
nuts (6) to specification.
TORQUE
Engine to Transmission Coupler Nuts:
88 ft-lbs (119 Nm)
9. Remove the lifting straps and overhead or portable
engine hoist and remove the spacer blocks
previously installed under the transmission and
engine.
10. Install the exhaust manifold and torque the fasteners
to specification.
TORQUE
Exhaust Manifold Bolts:
18 ft-lbs (24 Nm)
11. Install the exhaust pipe.
12. Install the coolant hoses onto the engine.
13. Install the throttle body and air box. Tighten the hose
clamps that secure the throttle body to the intake
duct, intake boot and air box.
VEHICLE DESCRIPTION
RZR 900
RZR 1000
ACE 900
RANGER Diesel
4
3.37
3