Valve Cover Installation - Polaris RANGER ETX 2015 Owner's Manual

VALVE COVER INSTALLATION

1. Prepare valve cover sealing surfaces by cleaning
thoroughly to remove all residue.
NOTE
Carefully pass the spark plug hole section
valve cover seal under the cam carrier bridge
remove or install the seal.
2. Install the three valve cover shoulder bolts
e
new isolators using a T40 driver.
IMPORTANT
New isolators are required once removed.
3. Torque valve cover bolts to specification.
TORQUE
Valve Cover Bolts
7 ft-lbs (10 Nm)
q
4. Install the spark plug and torque to specification.
TORQUE
Spark Plug:
9 ft-lbs (12 Nm)Do Not Apply Anti-seize
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
q
of the
w
to
w
and
ENGINE / COOLING SYSTEM
3
3.69