Engine To Transmission Coupler Service - Polaris RANGER ETX 2015 Owner's Manual

ENGINE / COOLING SYSTEM
325 ENGINE TO TRANSMISSION COUPLER
SERVICE
Disassembly Procedure
IMPORTANT
The engine / transmission bracket mounting bolts,
washers and flange nuts must always be discarded
when the nuts are either loosened or removed. Failure
to use new mounting hardware during reassembly may
cause damage to the engine crankcase, mounting
bracket, or transmission mounting ears.
1. Remove the outer clutch cover, drive belt, drive
clutch, driven clutch, inner clutch cover and clutch
outlet duct (see Chapter 6).
2. Place a spacer or support between the vehicle frame
and engine to hold the engine in position.
Image for reference only.
3. Place a block of wood under the transmission.
Remove the lock nuts
engine to transmission adapter mounting bolts (3)
and discard.
3.40
NOTE
y t
and washers from the
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
4. Remove the transmission mount through bolts
discard.
5. Using a 12 mm hex drive, turn the take-up nuts
clockwise to release the transmission ears from the
mount.
e
and
© Copyright Polaris Industries Inc.
r