All Wheel Drive (Awd) Coil; Operation Overview; Diagnosing System Failures - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

ALL WHEEL DRIVE (AWD) COIL

• When the AWD switch is "ON", 12 VDC power is

present at the hub coil on the Red/Green wire.

• If the criteria is met, the ECU provides a ground path

on the Brown/White wire.

• The AWD system must be grounded to operate.

• Verify the AWD switch is functional and that a

minimum of 11 volts is present at the hub coil on the

• Verify the AWD hub coil is functional. Test the AWD

hub coil using an ohm meter. See specifications below:

AWD Hub Coil Resistance:

24 Ohms ± 5%

• Verify the wiring harness, wiring, connectors,

connector pins and grounds are undamaged, clean

and connected properly.

• Verify continuity of wire connections with a volt/ohm

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

Table of Contents