Air Box Removal / Installation - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

AIR BOX REMOVAL / INSTALLATION

The air box assembly can be removed from the vehicle

through the maintenance access panel located in the

rear storage box.

Air Box Removal Procedure

1. Lift the rear cargo box to access the airbox.

2. Loosen the gear clamps

3. Unlatch the air box cover. Remove the cover from the

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

and the spring clamp

4. Remove the screw

and nut securing the bottom of

the air box assembly to the transmission bracket.

5. Remove the air box assembly.

Air Box Installation Procedure

1. Install the air box bottom assembly back into the

engine compartment.

2. Reinstall the screw and nut securing the air box to the

transmission mount. Torque nut to specification.

Air Box Fastener:

18 ft-lbs (24 Nm)

3. Reinstall the air box cover. Verify the cover tabs

engage the air box. Lock the clamps to secure the

4. Reinstall the breather hose spring clamp. Reposition

the gear clamps to secure the intake hoses onto the

air box. Tighten gear clamps to specification.

Air Intake Hose Gear Clamps:

24 in-lbs (2.7 Nm)

Table of Contents