Polaris RANGER ETX 2015 Owner's Manual page 138

ENGINE / COOLING SYSTEM
Camshaft Carrier Disassembly
1. Remove the camshaft carrier assembly. See:
Camshaft / Carrier Removal , page 3.44.
2. Remove the intake camshaft sprocket bolt
w e
and sprocket .
3. Remove the intake camshaft bearing retaining snap
r
ring .
4. Remove the decompression device retaining screw
h g
, washer , shaft
exhaust camshaft.
5. Rotate the exhaust camshaft gear opening to remove
the bearing retaining snap ring
between the pressed on exhaust camshaft gear and
bearing.
The exhaust camshaft gear is pressed onto the exhaust
camshaft during manufacturing and cannot be removed
from the exhaust camshaft.
3.46
q
, washer
f d
and spring from the
s
that is captured
NOTE
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
6. Support the camshaft carrier assembly in a suitable
shop press at the points shown. Press both the intake
and exhaust camshafts simultaneously to force the
i
bearings from the PTO side bearing support.
7. Support the camshaft carrier assembly at the points
shown and press the camshafts individually from the
MAG side bearing support.
8. Reverse disassembly procedure for reassembly.
© Copyright Polaris Industries Inc.