Polaris RANGER ETX 2015 Owner's Manual page 411

Table of Contents

8. Remove pinion seal, internal retaining ring and

pinion gear assembly from the gearcase housing.

Inspect and clean the gearcase housing and replace

all oil seals and O-rings.

9. Inspect the pinion gear for chipped, broken or

missing teeth. Inspect the pinion bearing for signs of

wear and the pinion shaft seal surface for pitting.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

10. Inspect the AWD coil located in the outer cover plate

assembly. Refer to "AWD Diagnosis" for detailed

inspection process. Replace the cover plate seal and

11. Remove the roll cage assembly and rollers from the

clutch housing. Use a shop towel to cover the

housing in order to retain all the rollers.

Rollers are spring loaded. Take care not to allow them

to fall out or lose them upon removal of the roll cage.

12. Thoroughly clean all parts and inspect the rollers (A)

for nicks and scratches. The rollers must slide up

and down and in and out freely within the roll cage

(B) sliding surfaces and H-springs.

Refer to the "Electronic Parts Catalog" for individual

part availability. Most parts are to be replaced as an

assembly or as a complete kit.

Chapters

Table of Contents