Engine Installation - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

ENGINE / COOLING SYSTEM

ENGINE INSTALLATION

Use the following procedure to reinstall the engine

Install the engine to transmission coupler (1) onto

the engine. Torque new bolts (2) in sequence (see

image below) to specification.

Engine to Transmission Coupler Engine Mounting

44 ft-lbs (59 Nm) (In sequence)

2. Clean the take-up nut (4) threads and install into the

engine to transmission coupler (1) by hand.

3. Attach suitable lifting straps to the engine and use an

overhead or portable engine hoist to lower the

engine into the vehicle frame. Place spacer blocks

under transmission and engine to assist with

alignment of the engine to transmission adapter

Have an assistant help guide the engine in and out of

the vehicle while using an engine hoist to prevent

personal injury or damage to vehicle components.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

4. Install the front engine mount bolts and torque to

specification.

Front Engine Mount Bolts:

30 ft-lbs (41 Nm)

5. Insert NEW engine to transmission coupler bolts (3)

half way into the engine to transmission coupler.

Table of Contents