Polaris RANGER ETX 2015 Owner's Manual page 422

FINAL DRIVE
7. Install the torsion spring by wrapping each leg of the
spring around the dowel pin on the ring gear.
8. Install the rollers and roll cage into the ring gear.
Insert the rollers as the roll cage is installed.
a
9. Install the pins , roll cage
i
assembly into the gearcase housing.
10. Align the spring retainer dowel pin with the ring gear
dowel pin and install the retainer
torsion spring.
7.28
o
, and ring gear
y
on top of the
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
11. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly.
12. Install the armature plates
plate tabs are fully engaged into the roll cage
assembly.
Verify armature plate tabs are in the slots on the roll
cage and are resting in the ring gear grooves.
13. Install the RH output hub
housing. The output hub should spin freely.
t
. Be sure the armature
NOTE
e
into the gearcase
© Copyright Polaris Industries Inc.