Polaris RANGER ETX 2015 Owner's Manual page 158

ENGINE / COOLING SYSTEM
10. Insert Cam Intake Tool (PA-51430) onto Cam Intake
gear. Secure Cam Intake Tool using a ratchet.
Torque intake camshaft sprocket bolt to specification.
TORQUE
Intake & Exhaust Camshaft Sprocket Bolt:
14 ft-lbs (19 Nm)
11. Remove the (PA-51430) from the intake gear and
(PA-51423) from the cam carrier.
12. Obtain the cam chain tensioner assembly.
13. Remove the screw
a
Extract the spring
Replace O-ring if damaged.
o
14. Push the detent down and push the ram
the housing.
3.66
d
from the end of the barrel.
and inspect the O-ring
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
15. Install the cam chain tensioner
u
into the cylinder and torque screws
specification.
Camshaft Chain Tensioner Screws:
16. Install the spring
Torque screw to specification.
17. Rotate crankshaft through two revolutions and verify
camshaft timing is correct.
s
.
Camshaft Chain Tensioner Spring Screws:
i
into
y
with a new gasket
TORQUE
6 ft-lbs (8 Nm)
a d
and screw into the barrel.
TORQUE
6 ft-lbs (8 Nm)
© Copyright Polaris Industries Inc.
f
to