Polaris RANGER ETX 2015 Owner's Manual page 373

15. Reinstall the driveshafts into the bearing carriers and
fasten the bearing carriers to the control arms.
Torque fasteners to specification.
TORQUE
Bearing Carrier Fasteners:
40 ft-lbs (54 Nm)
16. Install rear wheels and wheel nuts. Torque to
specification.
TORQUE
Steel Wheel Nuts:
36 ft-lbs (49 Nm)
Aluminum Wheel Nuts:
30 ft-lbs + 90º (41 Nm + 90º)
17. Properly lower the vehicle.
18. Install cone washers and castle nuts for the
driveshafts. Torque to specification.
TORQUE
Castle Nut110 ft-lbs (150 Nm)
19. Install a new cotter pin into each castle nut and
install the caps.
20. Install the throttle body, air box assembly and
ducting.
21. Reconnect the TPS and IAC harnesses.
22. Connect the (-) negative battery cable and reinstall
the seat base.
23. Reinstall the cargo box.
24. If transmission lubricant was drained, fill the
transmission with the specified amount of Polaris
AGL (see Chapter 2 "Transmission Lubrication").
FLUID CAPACITY
Recommended Transmission Lubricant:
AGL (PN 2878068) (Quart)
Capacity : 41 oz. (1200 ml)
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
TRANSMISSION
6
6.17