Polaris RANGER ETX 2015 Owner's Manual page 414

Table of Contents

9. Be sure the armature plate tabs are fully engaged

into the roll cage assembly and are resting on the

cut-grooves of the ring gear.

Verify armature plate tabs are in the slots on the roll

cage and are resting in the ring gear grooves.

10. Carefully install the ring gear and roll cage assembly

into the gearcase housing.

11. Install a new O-ring on the cover plate assembly.

Be sure the square O-ring is placed flat on the cover

surface. If the O-ring is twisted fluid leakage may occur.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

12. Carefully install the LH output hub assembly into the

cover plate. Take care not to damage the new cover

plate seal while installing the output hub.

13. Install the output cover assembly onto the gearcase

housing. Install the (7) cover plate screws and torque

to specification.

Front Gearcase Cover Plate Screws:

11 ft-lbs (15 Nm)

Chapters

Table of Contents