Polaris RANGER ETX 2015 Owner's Manual page 388

Table of Contents

TRANSMISSION

24. Assemble shift shaft rail if previously disassembled.

Both shift forks need to be orientated the same way, so

that the shift fork pins are both offset to the same side

of the rail.

25. Install the shift shaft rail (D) and shift forks into the

transmission housing as an assembly. Be sure the

shift forks are engaged into the engagement dogs.

Shift fork pins should be offset towards the input shaft

as shown above.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

26. Inspect the shift drum for any damage or wear.

Inspect the splines of the shift drum.

27. Install the shift drum (E) into the transmission

housing. Lift up on the shift shaft rail (D) and move

the rail assembly towards the shift drum to allow the

shift fork ends to be installed into the shift drum (E).

28. Apply a continuous bead of Crankcase 3 Bond

Sealant (PN 2871557) to the left hand transmission

mating surface.

Chapters

Table of Contents