Fuel Tank Installation; Fuel Sender Test - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

8. Remove the four screws

the frame support.

FUEL TANK INSTALLATION

Fuel is extremely flammable and may cause severe

burns, injury, or death.

Do not use any device that produces a flame or

electrical devices that may spark around fuel or fuel

1. Carefully reinstall the fuel tank assembly

2. Reinstall the four fuel tank mounting screws and

torque to specification.

Fuel Tank Screw Torque:

17 Ft-Lbs (23 Nm)

3. Reinstall the RH fender panel, the fuel cap and all

previously removed fasteners.

4. Connect the fuel pump electrical harness, the fuel

line, and the vent line. Verify the fuel line is locked in

to place by lightly tugging on the connector at the fuel

5. Reconnect the negative battery cable. Test the fuel

pump by turning the ignition key on and listening for

the pump to activate. Check for leaks.

6. Reinstall the seat assembly.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

securing the fuel tank to

1. Hook up an ohm meter to the Fuel Pump Module

Fuel Sender Resistance Specifications:

Full: 6 ± 1 Ω

Empty: 90 ± 4.5 Ω

connector terminal

and terminal

Fuel Level Sender (+)

Fuel Level Sender (-)

Fuel Pump Power (+)

Fuel Pump Power Ground (-)

Table of Contents