Polaris RANGER ETX 2015 Owner's Manual page 420

Table of Contents

13. Inspect the ring gear

or damage. The surfaces should be free of nicks or

14. Inspect roll cage (B) sliding surface. This surface

must be clean and free of nicks, burrs or scratches.

Inspect the H-springs, but do not remove them

from the roll cage.

15. Inspect the armature plate for a consistent wear

pattern. Uneven wear of the armature plate indicates

a warped plate, which may cause intermittent

See "FRONT GEARCASE DIAGNOSIS" later in this

chapter for more details.

for inconsistent wear patterns

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

16. Drill a hole in the input shaft seal

seal using a pry bar or seal puller.

17. Remove the snap ring retaining the input shaft

18. Remove the input shaft assembly. Inspect the pinion

for chipped, broken, or missing teeth. Inspect

the input shaft bearing

the input shaft cover O-ring prior to reassembly.

and remove the

for signs of wear. Replace

Chapters

Table of Contents