Polaris RANGER ETX 2015 Owner's Manual page 364

TRANSMISSION
8. Disconnect the main harness from the IAC and TPS
at the throttle body.
9. Loosen the air box to throttle body clamp (Item 6) and
move the air box assembly (Item 7) out of the way
towards the driver's seat.
10. Remove the outer clutch cover, drive belt, drive
clutch, driven clutch, inner clutch cover and clutch
outlet duct (see Chapter 6).
Be sure to use the correct Drive Clutch Puller (PA-
48595) to prevent damage to crankshaft.
11. Remove driveshaft from both sides (see Chapter 7).
12. Place a spacer or support between the vehicle frame
and engine to hold the engine up in position.
6.8
NOTE
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
Image for reference only.
13. Remove vent hose from transmission.
14. Remove the gear position switch connector (Item 8),
speed sensor connector (Item 9), crankshaft position
sensor connector, shift bracket bolts (Item 10) and
shift bracket (Item 11), shift cable clevis pin and
washer (Item 12) from the transmission.
15. Remove the wire ties retaining the main harness
harness to transmission and mounts.
16. Remove the lock nuts and washers from the engine
to transmission coupler mounting bolts.
NOTE
© Copyright Polaris Industries Inc.