Box Removal; Box Installation - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

BOX REMOVAL

1. Remove the screw

that secures the hinge pin to

the frame on both sides.

2. Lift the cargo box into the dump position.

3. Disconnect the rear wire harness attached to the tail

4. Remove the upper clip

shock to the cargo box.

Safely support the box during the remainder of the

removal process. The box is not as stable with the

shock removed.

5. Remove the hinge pin from both sides.

6. With both hinge pins removed, remove the box from

the frame. Two people may be needed to remove the

box from the frame.

Use caution when removing the box. It is recommended

to have two people carefully remove the box from the

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

1. If the shock was replaced, install the lower portion of

2. Place the cargo box onto the frame. Align the hinges

3. Install the box hinges on both sides.

4. Secure the box hinges with the hinge screws on both

5. With the hinges installed, attach the shock to the

6. Lower the box and secure the latch.

attaching the

the shock to the frame and secure it with the pin and

of the box with the bracket on the frame.

cargo box by inserting the pin and clip.

BODY / FRAME

Table of Contents