Water Pump Service - Polaris RANGER ETX 2015 Owner's Manual

WATER PUMP SERVICE

Removal
q
1. Remove four screws and Water Pump Cover
2. Remove Water Pump Impeller
NOTE
Water pump impeller has left hand threads.
3. Remove Water Pump Seal
2872105–A. The water pump seal shell
in the engine and will need to be removed. Carefully
pry around the outer edge of the seal body with a pick
or small flat-blade screw driver.. Do not damage the
mating surface. Continue prying around the outer
circumference until the seal body is removed from the
bore.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
w
.
e
.
4. An oil seal
5. Use a small pick to puncture the seal and pull it out of
r
using special tool
t
will remain
6. Install a new oil seal with the seal lips towards the
7. Press seal into bore until it is flush with the case
ENGINE / COOLING SYSTEM
NOTE
Mechanical seal shown disassembled using special
tool. New seal is one-piece.
y
is located behind the mechanical seal
bore. This seal should be replaced when replacing
the mechanical seal.
the bore.
balance shaft.
u
surface .
3
3.31