Polaris RANGER ETX 2015 Owner's Manual page 376

TRANSMISSION
11. Remove all transmission case bolts. Using suitable
pry bars, remove the cover using the designated pry
points (indicated by black arrows in illustration
below).
CAUTION
Do not pry on case sealing surfaces. Use only the
designated pry points on the transmission.
12. Lift up on the shift shaft rail (Q) and move the rail
assembly rearward to allow the shift fork pins to be
removed from the shift drum (R). Remove the shift
drum (R) from the transmission housing.
6.20
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
13. Remove the shift shaft rail (Q) and shift forks from
the transmission housing as an assembly.
14. Remove the rear output shaft assembly (S) by lifting
underneath the gear or by tapping the shaft from the
opposite side. If use of a pry bar is necessary, take
care not to pry on sealing surfaces of case.
© Copyright Polaris Industries Inc.