Adjustment - Polaris RANGER ETX 2015 Owner's Manual

PVT SYSTEM

ADJUSTMENT

1. Remove the Clutch Center Distance tool from the
engine and transmission.
2. Remove the inner PVT Cover.
3. Loosen the eight engine to transmission coupler
q
bolts .
4. Loosen the two fasteners
transmission isolator to the vehicle frame.
5. With the engine
fasteners loose, install the Clutch Center Distance
Tool as shown in the inspection process.
Clutch Center Distance Tool
PU-50658
5.12
w
securing the rear
and transmission mounting
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
6. With the tool now properly installed, in sequence
torque the eight engine to transmission coupler bolts
to specification.
TORQUE
Engine To Trans Coupler Bolts:
In Sequence:55 ft-lb (75 Nm)
7. Torque the two rear transmission isolator fasteners
e
to specification
8. Remove the Clutch Center Distance tool and
reassemble the PVT system as outlined in this
chapter.
TORQUE
Rear Trans. Isolator Bolts:
40 ft-lbs (54 Nm)
© Copyright Polaris Industries Inc.