Polaris RANGER ETX 2015 Owner's Manual page 340

PVT SYSTEM
Assembly Procedure
1. Clean the take-up nut
engine to transmission coupler
2. Insert NEW engine to transmission coupler bolts
half way into the engine to transmission coupler.
3. Install the Clutch Center Distance Tool onto the
crankshaft and transmission input shaft. The pictures
below show a properly installed tool.
Clutch Center Distance Tool
PU-50658 or PU-50658-A
5.14
r
threads and install into the
q
by hand.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
Images for Reference only. The tool shown should only
be used to check center to center distance.
e
The location the tool rests on the shafts may vary.
HOLE YEAR
1 2012
2011-14
2 2014-15
2013
2014-16
2015-18
2015-16
3
2013–18
2014–18
2015-18
2014-18
2015-18
4
2016-18
2016–18
5 2015-18
i.e. 2015 RZR 900 uses the holes marked with a 4
4. Turn the upper and then lower take up nuts (4)
counterclockwise (4) to no more than the specified
torque. Repeat the step 4 process.
Engine to Transmission Coupler Take Up Nut:
Do not over-torque the take up nuts. Torque nuts using
the sequence described in step 4. If too much torque is
applied to the take up nuts, the transmission mounting
NOTE
PU-50658–A
VEHICLE DESCRIPTION
RZR 570
RZR 900
RZR XP 1000
RANGER 900
ACE
ACE 570
RGR ETX
RZR 570
RANGER 500/570
RANGER 570 Full-Size
RANGER 900/1000
RZR 900
RZR 1000
ACE 900
RANGER Diesel
TORQUE
60 in-lbs (6.7 Nm)
IMPORTANT
ears may break.
© Copyright Polaris Industries Inc.