Table of Contents
Advertisement
IVX
IVX
H
I
ARDWARE
NSTALLATION
M
B
AIN
OARD
M
M
EMORY
ODULE
P
C
ORT
ARDS
F
P
EATURE
HONES
DSS/BLF C
ONSOLE
IVX hardware configuration consists of the wall
mounted System Cabinet (8.5" W x 11"H x 3"
D ) with an external wall mount transformer
and the IVX Feature Phones. The cabinet
houses the Main Board, slots for two 4 x 8 Port
Cards, and the Memory Module. An expan-
sion cabinet expands the system to 16 x 34.
The main board combines leading-edge hard-
ware components including a 68000 class
Motorola processor and DSP structure along
with proprietary operating system firmware.
The board also provides: a standard RS 232
DB9 serial port for report output and on-site PC connection, a built-in
14.4K baud modem for remote programming/maintenance, and two
analog ports.
A hard disk drive with proprietary formatting contains all system pro-
gram and configuration data and pre-loaded voice prompts. IVX stores
up to 30 hours of voice at 64Kb/s voice sampling.
Port cards provide for configurations in multiples of 4 loop start lines by
8 stations. Each port card has a standard female Amphenol connector
for easy wiring to a standard 66 block.
The IVX Feature Phone is equipped with speaker phone, 32 character
LCD display, and both fixed and programmable feature keys. Phones
connect to the cabinet via standard 4 wire twisted pairs.
The DSS/BLF Console adds 48 additional
Soft Feature Keys to a designated user's
extension. The console requires a station
port for connection and only one DSS/BLF
Console can be installed per Port Card.
Each console can be paired with any exten-
sion in the system.
H
I
ARDWARE
NSTALLATION
2.1
Advertisement
Table of Contents
