Table of Contents
Advertisement
4.8 P
ROGRAMMING
F
17
UNCTION
IVX
F
18
UNCTION
IVX
S
S
D
YSTEM
PEED
Up to 100 System Speed Dial names and associated numbers
can be stored (in location numbers 600 to 699) for access by
any station. A user can initiate a speed dial by dialing the loca-
tion number (600 to 699).
Enter the 3 digit location number to program, a ten character
name, and the number to be dialed (including the line group 9,
8, or 7) .
The number can be up to 30 digits long including the additional
characters: #, *, F (flash). or P (a 2 second pause). These are
inserted by pressing the PARK 3 Key to select the desired char-
acter: # , * , P or F. Press # to confirm the inserted character
and continue. Press ## to complete the entry.
Example: to create a System Speed Dial number that dials 9,
578-5644, pauses for 4 seconds, and dials #104 input:
95785644, (Tab to) P, #, (Tab to) P, #, (Tab to) # , #, 104 #.
Press the HOLD Key to delete any character or digit entered in
error. To delete an entire speed dial number and name, delete
the location number by pressing the HOLD Key.
Note: System Speed Dial will be available to all stations regard-
less of the station's line access or toll restriction.
S
P
B
ERIAL
ORT
AUD
The baud rate for the system's serial port is selected by press-
ing the PARK 3 Key until the desired rate is displayed. Press #
to confirm. The possible rates are:
300, 1200, 2400, 9600, 19.2, or 38.4. Default is 38.4.
Note: The output from the serial port is: 8 data bits, 1 stop bit,
and no parity. The pinout is: Data Transmit – Pin 2, Receive –
Pin 3, and Ground – Pin 5.
IAL
R
ATE
IVX
Advertisement
Table of Contents
