Table of Contents
Advertisement
4.22 P
ROGRAMMING
F
35
UNCTION
CO L
K
INE
EY
S
K
TATION
EY
S
D
K
PEED
IAL
EY
E
B
XTENSION
UTTON
The initial system-wide Soft Feature Key positions are dictated
as a result of the CO Line Programming (Function 21). Function
35 can be used to change those system-wide positions.
Further, users can change the Soft Feature Key positions for
their stations as part of station programming. Removing the
Line Key appearances will set the system to operate as a PBX
with line access by dialing 9 (8 or 7).
Warning: Future, system-wide changes made here by the
Installer will overwrite any station user programming.
When prompted, press the desired Soft Feature Key location,
then input the appropriate digits on the dialpad and confirm by
pressing the same Soft Feature Key again.
Note: To determine how a Soft Feature Key is currently pro-
grammed, press the key, note how is is programmed, and press
the key again.
If the dialed digits are 1 thru 16, the key will serve as a CO Line
key.
If the digits input is a three digit extension number (or
Department, Guest Mailbox, etc.), the key will become a Station
Key providing the appropriate lamp information.
Department pilots numbers (200 to 209) programmed here will
appear on all phones, however Agent Log On keys (5200 to
5209) will only appear at the phones of assigned agents in the
corresponding ACD Department.
If 9 (8 or 7) plus a phone number are input, the key will become
a Speed Dial Key for outside calls.
M
APPING
IVX
Advertisement
Table of Contents
