Table of Contents
Advertisement
4.6 P
ROGRAMMING
F
12 & 13
UNCTION
IVX
F
14
UNCTION
IVX
F
15
UNCTION
IVX
F
UNCTION
IVX
I
NSTALLER
These functions will display the existing password and prompt
for input of a new password. The passwords can be 2 to 8 digits
long. The Installer can change either the Installer or
Administrator Password. Only those functions listed in the
Administrator's Manual can be programmed via the
Administrator Password. The default passwords are:
Installer Password (Function 12)
Administrator Password (Function 13) = 456.
Note: Be sure to write down the new passwords in a safe place
and give the new Administrator's Password to the Administrator.
Note: The Installer or Administrator can access a user's station
programming. At the user's station, when prompted to enter the
User's Password, input the Installer or Administrator Password
and follow normal user programming.
S
T
/ D
ET
IME
ATE
A new time is input in a twelve hour format. Input "1233" for
12:33, or "315" for 3:15. Select AM or PM by pressing the PARK
3 Key.
A new date in input in an eight digit format including leading
zeros. For 7/4/98 input 07041998#.
Note: A built-in battery will maintain the correct time and date,
even in the event of a power loss.
S
T
P
YSTEM
IMING
151
F
D
LASH
URATION
The flash hook duration sets the time (in tenths of a second)
that a flash hook will generate a fresh CO dial tone. The range
is 0.2 sec to 2.0 sec. Default = 1.5 sec
& A
DMINISTRATOR
ARAMETER
IVX
P
ASSWORDS
= 789
Advertisement
Table of Contents
