ESI ORIGINAL IVX Installation Manual page 71

IVX
Default is 191 for FAX and 192 for PAGE.
Each programming step is as follows (only
the appropriate steps for each type will be
required):
1. 2. 3.
EXT TYPE CO
191 FAX 9
192 DOOR
xxx RINGER
xxx MODEM 9
xxx PAGE
xxx PHONE 9
Each programming step is as follows:
1. E N
XTENSION UMBER
Select either 191 or 192 by pressing the PARK 3 Key.
2. T
YPE
Select the type by pressing the PARK 3 Key.
3. CO L
INE
Off hook preference can be either dial 9, 8, or 7 (to a CO Line
Group) for FAX, Modem, or Phone. Default is 9. Off hook pref-
erence will be to an extension for door phone. No dial tone is
presented for Common Ringer or Overhead Paging.
4. R D
ING OWN
A Ring Down destination can be programmed only if the type
selected is DOOR. Enter an Extension, Department, or Mailbox
to ring whenever the station is taken off-hook. Default = 0 (the
operator)
5. & 6. C F
ALL ORWARD
The ports can be set to call forward busy/no answer to an
Extension, Department, Mailbox or a Branch ID for Day Mode
and differently for Night Mode. Default = 9999 (automatic dis-
connect).
7. T R
OLL ESTRICTION
Allows the port to originate toll calls. If denied, the ports can
only originate non-toll calls or calls to numbers listed in the Allow
Exception Table. Default is Allow.
P
ROGRAMMING
4. 5.
RING DN CF DAY CF NIGHT TOLL
ID9999 ID9999
0 ID9999 ID9999
ID9999 ID9999
X0
B / N A
USY O NSWER
4.21
6. 7.
Y
Y
X0 Y