Base Station Installation - ESI 50L User Manual

Introduction
ESI Cordless Handset connection
Each ESI Cordless Handset comes with:
• A charger/cradle to charge the Handset.
• An AC adapter for use with only the charger.
• A base station to provide a digital interface between the ESI system and ESI Cordless Handset.
This base station is line-powered and thus needs no AC power.
• Wall-mount(s), a belt clip, and a Quick Reference Guide.

Base station installation

Due to each site's unique characteristics, the range and distance information we'll provide herein is
only approximate.
Characteristics that positively affect performance:
• The base station should be installed so it has a clear line-of-sight with the Cordless Handset.
• The base station antenna should always be pointed in its uppermost vertical position.
Characteristics that negatively affect performance:
• Large amounts of metal shelving (such as in manufacturing or warehouse areas).
• Close proximity to (within one mile of) a radio tower.
• Concrete walls that divide spaces where Cordless Handsets are used (assuming the base stations are in
one location).
Don't install the base station:
• Close to a wall with metal studs.
• On a metal wall.
• Next to a device that emits RFI or EMI
fluorescent light fixture, or fax machine.
• Next to any other 900 MHz device — e.g., a hand-held inventory control device.
• In a ceiling that has foil-backed insulation.
• Behind doors that typically are closed, tinted windows, one-way glass, or other areas that limit or
cut off transmission to the Cordless Handset.
Base stations must be installed at least 10 feet apart, regardless of whether the base station is for the
small-model or large-model Cordless Handset. Don't install more than six base stations in one area
(such as a network room). Choose a location at least 30 feet away if more than six base stations are needed
in a building.
A Digital Cordless Handset base station requires only a line cord to the ESI system; AC power isn't needed
because the base station receives power from the system via the line cord.
Once the base stations are installed and the Cordless Handsets charged, change each Handset's channel by
pressing its CH key. Each Handset should have its own channel. There are 30 available channels on the
small Cordless Handset and 10 on the large Cordless Handset.
1
RFI is radio frequency interference. EMI is electromagnetic interference.
A.10
1
— e.g., a television, radio, computer, computer printer,
User's Guide