Table of Contents
Advertisement
IVX
Enter Programming Mode by pressing PROG/HELP Key, the PARK 3
Key, and the password when prompted.
1 System Programming
11 Initialize
Select Reset or Initialize, confirm with Installer Password.
12 Installer Password
The range is 2 to 8 digits.
Default = 789
13 Administrator Password
The range is 2 to 8 digits.
Default = 456
14 Set Time
Input in a twelve hour format.
15 System Timing Parameters
151 Flash Duration
The range is 2 to 10 (0.2 to 2.0 sec).
Default = 1.5 sec
152 Transfer Recall Timer
The range is 1 to 9 rings.
Default = 3
153 Hold/Park Recall Timer
The range is 5 to 120 seconds.
Default = 60
154 ACD Exit Timer
The range is 5 to 600 seconds.
Default = 180 seconds
153 ACD Wrap Timer
The range is 5 to 600 seconds.
Default = 0 (no limit)
16 Recording Alert
Default = OFF
17 System Speed Dial
Use the input sheet on the following page.
18 Serial Port Baud Rate
The options are: 300, 1200, 2400, 9600, 19.2 or 38.4
Default = 38.4
P
W
ROGRAMMING
ORKSHEET
6.1
Advertisement
Table of Contents
