ESI ORIGINAL IVX Installation Manual page 87

Hide thumbs Also See for ORIGINAL IVX:
Table of Contents

Advertisement

IVX
F
UNCTION
F
UNCTION
F
UNCTION
Note: If ACD is used, it is recomended that Prompt 590, 591 or
a custom prompt without periodic "voice-overs" be used since
the ACD Hold Prompt will also be played while a caller is on
hold.
631 MOH S
OURCE
This selects the source that will be played to callers on hold.
The range is 590 to 598. Default = 591 (generic Message on
Hold)
632
MOH R
ECORDING
Connect the message/music source to the MOH port on the
side of the cabinet, input the prompt number to be recorded,
press 1 to begin recording, press 1 when finished. To aid in
queuing, the source will be played through the phone's speaker
while recording. The recorded material will then playback just
as any other recording, press # to accept the recording. The
recorded material should not have a "beginning" or "end" so that
playback can loop continuously.
633 MOH V
OLUME
If an external audio source such as a radio is used for
MOH, the volume should be adjusted at the radio. If
a custom MOH is recorded, the output volume can be
adjusted in this function.
The range is 1 (lowest) to 12 (maximum volume).
Default = 6.
P
4.37
ROGRAMMING

Advertisement

Table of Contents
loading

Table of Contents