Disposal; Removing The Measuring Device; Disposing Of The Measuring Device - Endress+Hauser Proline Cubemass C 100 HART Operating Instructions Manual

Proline Cubemass C 100 HART
Endress+Hauser
14.5

Disposal

If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to Endress+Hauser for
disposal under the applicable conditions.
14.5.1

Removing the measuring device

1. Switch off the device.
WARNING
L
Danger to persons from process conditions.
‣
Beware of hazardous process conditions such as pressure in the measuring device, high
temperatures or aggressive fluids.
2. Carry out the mounting and connection steps from the "Mounting the measuring
device" and "Connecting the measuring device" sections in reverse order. Observe the
safety instructions.
14.5.2

Disposing of the measuring device

WARNING
L
Danger to personnel and environment from fluids that are hazardous to health.
‣
Ensure that the measuring device and all cavities are free of fluid residues that are
hazardous to health or the environment, e.g. substances that have permeated into
crevices or diffused through plastic.
Observe the following notes during disposal:
‣
Observe valid federal/national regulations.
‣
Ensure proper separation and reuse of the device components.
Repair
97