Endress+Hauser Proline Cubemass C 100 HART Operating Instructions Manual page 93

Proline Cubemass C 100 HART
Parameter
Device tag
Serial number
Firmware version
Device name
Order code
Extended order code 1
Extended order code 2
Extended order code 3
ENP version
Device revision
Device ID
Device type
Manufacturer ID
Endress+Hauser
Parameter overview with brief description
Description
Enter the name for the measuring point.
Displays the serial number of the measuring
device.
Displays the device firmware version
installed.
Displays the name of the transmitter.
Displays the device order code.
Displays the 1st part of the extended order
code.
Displays the 2nd part of the extended order
code.
Displays the 3rd part of the extended order
code.
Displays the version of the electronic
nameplate.
Displays the device revision with which the
device is registered with the HART
Communication Foundation.
Displays the device ID for identifying the
device in a HART network.
Displays the device type with which the
measuring device is registered with the
HART Communication Foundation.
Displays the manufacturer ID with which the
measuring device is registered with the
HART Communication Foundation.
Diagnostics and troubleshooting
Extended order code 2
Extended order code 3
ENP version
Device revision
Device ID
Device type
Manufacturer ID
IP address
Subnet mask
Default gateway
User interface
Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /)
Max. 11-digit character string
comprising letters and
numbers.
Character string with the
following format:
xx.yy.zz
Character string composed of
letters, numbers and certain
punctuation marks.
Character string composed of
letters, numbers and certain
punctuation marks
Character string
Character string
Character string
Character string in the format
xx.yy.zz
0 to 255
Positive integer
0 to 255
0 to 255
Factory setting
Promass 100
79AFFF16000
01.01
Promass 100
–
–
-
-
2.02.00
2
6-digit hexadecimal number
74
17
93