Endress+Hauser Proline Cubemass C 100 HART Operating Instructions Manual page 60

Commissioning
Parameter
Operating mode
Assign frequency output
60
Frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
Structure of the submenu for the frequency output
Pulse/frequency/switch output
Parameter overview with brief description
Description
Define the output as a pulse, frequency or
switch output.
Select process variable for frequency output.
Proline Cubemass C 100 HART
→ Operating mode
Assign frequency output
Minimum frequency value
Maximum frequency value
Measuring value at minimum frequency
Measuring value at maximum frequency
Failure mode
Failure frequency
Invert output signal
Selection / User entry
• Pulse
• Frequency
• Switch
• Off
• Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
• Carrier mass flow
• Density
• Reference density
• Concentration
• Dynamic viscosity
• Kinematic viscosity
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Carrier pipe temperature
• Electronic temperature
• Oscillation frequency 0
• Oscillation frequency 1
• Frequency fluctuation 0
• Frequency fluctuation 1
• Oscillation amplitude 0
• Oscillation amplitude 1
• Oscillation damping 0
• Oscillation damping 1
• Tube damping fluctuation 0
• Tube damping fluctuation 1
• Signal asymmetry
• Exciter current 0
• Exciter current 1
Factory setting
Pulse
Off
Endress+Hauser