Commissioning
Parameter
Format display
Value 1 display
0% bargraph value 1
100% bargraph value 1
Decimal places 1
Value 2 display
Decimal places 2
Value 3 display
0% bargraph value 3
100% bargraph value 3
74
Parameter overview with brief description
Description
Select how measured values are shown on
the display.
Select the measured value that is shown on
the local display.
Enter 0% value for bar graph display.
Enter 100% value for bar graph display.
Select the number of decimal places for the
display value.
Select the measured value that is shown on
the local display.
Select the number of decimal places for the
display value.
Select the measured value that is shown on
the local display.
Enter 0% value for bar graph display.
Enter 100% value for bar graph display.
Proline Cubemass C 100 HART
Selection / User entry
• 1 value, max. size
• 1 bargraph + 1 value
• 2 values
• 1 value large + 2 values
• 4 values
• Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
• Carrier mass flow
• Density
• Reference density
• Concentration
• Dynamic viscosity
• Kinematic viscosity
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Carrier pipe temperature
• Electronic temperature
• Oscillation frequency 0
• Oscillation frequency 1
• Oscillation amplitude 0
• Oscillation amplitude 1
• Frequency fluctuation 0
• Frequency fluctuation 1
• Oscillation damping 0
• Oscillation damping 1
• Tube damping fluctuation 0
• Tube damping fluctuation 1
• Signal asymmetry
• Exciter current 0
• Exciter current 1
• Sensor integrity
• None
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
Signed floating-point number
Signed floating-point number
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
Picklist (see 1st display value)
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
Picklist (see 1st display value)
Signed floating-point number
Signed floating-point number
Factory setting
1 value, max. size
Mass flow
0 kg/h
2.5 kg/h
x.xx
None
x.xx
None
0
0
Endress+Hauser
Need help?
Do you have a question about the Proline Cubemass C 100 HART and is the answer not in the manual?
Questions and answers