Endress+Hauser Proline Cubemass C 100 HART Operating Instructions Manual page 46

Operation options
46
Establishing a connection
1. Start FieldCare and launch the project.
2. In the network: Add a device.
 The Add device window opens.
3. Select the CDI Communication TCP/IP option from the list and press OK to confirm.
4. Right-click CDI Communication TCP/IP and select the Add device option in the
context menu that opens.
5. Select the desired device from the list and press OK to confirm.
 The CDI Communication TCP/IP (Configuration) window opens.
6. Enter the device address in the IP address field and press Enter to confirm:
192.168.1.212 (factory setting); if the IP address is not known .
7. Establish the online connection to the device.
For additional information, see Operating Instructions BA00027S and BA00059S
User interface
2 3 4
Xxxxxx/.../.../
Device name:
Device tag:
1
Status:
Xxxxxx
Access status tooling
P
Operation
+
–
Setup
Device tag
P
– System units
Mass flow unit
P
8
Volume flow unit
P
+ Select medium
+ ...
+
...
+ Advanced setup
+ Diagnostics
+ Expert
10 11
1 Header
2 Picture of device
3 Device name
4 Device tag→  53
5 Status area with status signal→  84
6 Display area for current measured values →  79
7 Edit toolbar with additional functions such as save/restore, event list and create documentation
8 Navigation area with operating menu structure
9 Working area
10 Range of action
11 Status area
5 6 7
Xxxxxxx Mass flow:
Xxxxxxx
Volume flow:
Good
Mass flow unit:
Maintenance
Volume flow unit:
Xxxxxx
kg/h
m /h ³
Proline Cubemass C 100 HART
kg/h
12.34
12.34
m /h ³
kg/h
m /h ³
Endress+Hauser
9
A0021051-EN