Engineering Assistant Software; Software Installation For Foundation Fieldbus; Establish Communications With Transmitter Using Rosemount 3095 Ea; For Foundation Fieldbus - Emerson Rosemount 3051S Series Reference Manual

Configuration
October 2016
The second part is configuring the Mass Flow Block to accept pressure and temperature inputs from
other transmitters. The differential pressure is passed to the Mass Flow Block through a channel. The
pressure and temperature inputs can be linked through any F
If a National Instruments Fieldbus interface device is already owned, go to
mount
Fieldbus interface device is not already owned, contact your local sales person for ordering options.
Note
Could affect block execution times.
3.11

Engineering Assistant Software

3.11.1 Software installation for F
Software operation requires installation of both the Rosemount 3051S Engineering Assistant (EA) for
F
OUNDATION
F
OUNDATION
cannot be opened simultaneously. Upgrades for the EA are available on
mount.
1. Follow the instructions below to complete required software installation.
a. Place EA Software CD-ROM disk 2 into the disk drive.
b. Browse and select the EA-Ff folder using Microsoft
c. Open the ReadMe.txt file and follow the instructions.
2. Install the F
instructions provided with the card. Installation of the communications card is not required for offline
operation of the program.
3.11.2 Establish communications with transmitter using Rosemount
3095 EA for F
1. Connect the 9-pin communications cable into the PCMCIA card port located in the computer.
2. Connect communication wiring to the cable connectors labeled "D
3. Open the transmitter cover on the side marked "Field Terminals". Connect the communication wires
to the transmitter terminals labeled "Fieldbus Wiring".
4. Verify device is properly powered to establish communications.
5. Open the EA for F
menu or use the Rosemount 3051S EA for FF shortcut icon.
6. Select Scan to scan the F
Rosemount 3051S F
Block. The transmitter device tag name will appear on the screen in the Device view. The Device Status
view will publish the status of the transmitter.
44
to download the Rosemount 3051S revision 23 Device Description. If a National Instruments
Fieldbus program and F
Fieldbus and EA for HART can be loaded onto the same computer. However, the programs
Fieldbus PCMCIA communications card into the machine by following
OUNDATION
OUNDATION
Fieldbus program. Select EA for F
OUNDATION
OUNDATION
OUNDATION
Note
F Fieldbus communication status is represented in the lower right corner of the
OUNDATION
screen. If status is ONLINE, communication has been established. If status is OFFLINE,
communication has not been established and/or communication has been disconnected.
Fieldbus
OUNDATION
Fieldbus communication card drivers. The EA for
OUNDATION
®
Fieldbus
Fieldbus segment. Scanning will locate and present a live
Fieldbus Transmitter on the segment that has a licensed Mass Flow
Reference Manual
00809-0200-4801, Rev DA
Fieldbus configurator.
OUNDATION
EmersonProcess.com/Rose-
EmersonProcess.com/Rose-
™
Windows NT, 2000, or XP.
+ -
" and "D ".
Fieldbus from the program
OUNDATION
Configuration