Engineering Assistant Installation; System Requirements - Emerson rosemount 3051S series Quick Start Manual

Quick Start Guide
Figure 7. Rosemount 3051SMV RTD Wiring Connection
C
A. Ground lug
B. RTD cable assembly wires
C. Pt 100 RTD sensor

5.0 Engineering Assistant installation

5.1 Engineering Assistant 6.1 or later
The Rosemount 3051SMV Engineering Assistant 6.1 or later is PC-based software
that performs configuration, maintenance, diagnostic functions, and serves as
the primary communication interface to the Rosemount 3051SMV with the fully
compensated mass and energy flow feature board.
The Rosemount 3051SMV Engineering Assistant software is required to complete
the flow configuration.
To ensure correct operation, download the most current version of the Engineering Assistant
software at EmersonProcess.com/Rosemount-Engineering-Assistant-6.

5.2 System requirements

The following are the minimum system requirements to install the Rosemount
3051SMV Engineering Assistant software:
Pentium-grade processor: 500 MHz or faster

Operating system: Windows

or 64-bit)
10
B
™
A
XP Professional (32-bit), or Windows 7 (32-bit
October 2016