Emerson Rosemount 3051S Series Reference Manual page 227

F Fieldbus Block Information
OUNDATION
October 2016
Table C-5. ADB Parameters
Parameter Index
SPM4_PARAM 65
_INDEX
block type of the entered block
SPM4_STATUS 66
SPM4_ 67
TIMESTAMP
SPM4_USER_ 68
COMMAND
SPM4_MEAN 69
SPM4_MEAN_ 70
CHANGE
SPM4_STDEV 71
SPM4_STDEV_ 72
CHANGE
SPM4_ 73
BASELINE_
MEAN
SPM4_ 74
BASELINE_
STDEV
SPM4_MEAN_ 75
LIM
SPM4_HIGH_ 76
VARIATION_
LIM
SPM4_LOW_ 77
DYNAMICS_
LIM
PLINE_STATUS 78
PLINE_ 79
TIMESTAMP
F Fieldbus Block Information
OUNDATION
Valid range
All DS-65 parameters for the
tag. Any number can be
entered, but an invalid index
will result in a rejection of a
"True" write to the
SPM_ACTIVE parameter
1.Inactive
2.Learning
3.Verifying
4.No Detections
5.Mean Change Detected
6.High Variation Detected
7.Low Dynamics Detected
8.Not Licensed
All Times and Dates
1.Detect
2.Learn
3.Quit
4.Idle
0.0f
 0.0f
0.0f
1.Inactive
2.Learning
3.Verifying
4.All Lines Plugged
5.OK
6.Insufficient Dynamics
7.BAD PV Status
8.Not Licensed
All Times and Dates
Initial value Units Other Description
0 N/A
Inactive N/A Read
Only
0 Time Read
Only
4 N/A
0.0f N/A Read
Only
0.0f % Read
Only
0.0f N/A Read
Only
0.0f % Read
Only
0.0f N/A Read
Only
0.0f N/A Read
Only
0.0f %
0.0f %
0.0f %
Inactive N/A Read
Only
0 Read
Only
Reference Manual
00809-0200-4801, Rev DA
OD Parameter index for the SPM4 Block
Tag that is entered.
Status of the SPM4 Statistical Process
Monitoring
Timestamp of last SPM4 Statistical
Process Monitoring status change
User control for the SPM4 Statistical
Process Monitoring session.
Last Mean of SPM4
% Change in SPM4 Mean with respect to
Baseline Mean
Last Stdev of SPM4
Change in SPM4 Stdev with respect to
Baseline Stdev
Baseline Mean for SPM4
Baseline Stdev for SPM4
% Change in mean for SPM4 allowed by
user
% Increase in dynamics for SPM4 allowed
by user
% Decrease in dynamics for SPM4 allowed
by user
Last Impulse line status
Last Timestamp for PLINE_STATUS
217