Diagnostics - Emerson Rosemount 3051S Series Reference Manual

Reference Manual
00809-0200-4801, Rev DA
5.6.1

Diagnostics

Table 5-7
actions are in order of increasing system level compromises. The first step should always be to reset the
transmitter and then if the error persists, try the steps in
and then try the second.
Table 5-7. Sensor Transducer Block DETAILED_XD_STATUS and RECOMMENDED_ACTION Messages
Condition name and description
Pressure sensor not updating
Temperature sensor not updating
Sensor ROM Check sum failure
Sensor NV write failure
Sensor RAM check sum error
Sensor NV factory data warning
Sensor NV user data warning
Sensor NV user data error
Sensor NV factory data error
Pressure sensor out of limits
Sensor temperature out of limits
Sensor temperature beyond failure limits
Troubleshooting
lists the potential errors and the possible corrective actions for the given values. The corrective
Table 5-7. Start with the first corrective action
RECOMMENDED_ACTION
1. Restart processor.
2. Reconnect SuperModule cable.
3. Send to Service Center.
1. Restart processor.
2. Reconnect SuperModule cable.
3. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Restart processor.
2. Send to Service Center.
1. Check pressure.
2. Restart processor.
1. Check temperature.
2. Restart processor.
1. Check temperature.
2. Restart processor.
3. Send to Service Center.
Troubleshooting
October 2016
61