Emerson Rosemount 3051S Series Reference Manual page 210

Reference Manual
00809-0200-4801, Rev DA
Table C-1. Resource Block Parameters
Parameter Index
DEV_REV 12
DD_REV 13
GRANT_DENY 14
HARD_TYPES 15
RESTART 16
FEATURES 17
FEATURE_SEL 18
CYCLE_TYPE 19
CYCLE_SEL 20
MIN_CYCLE_T 21
MEMORY_ 22
SIZE
NV_CYCLE_T 23
FREE_SPACE 24
FREE_TIME 25
SHED_RCAS 26
SHED_ROUT 27
200
Valid range Initial value Units Other Description
23
3
0x0003
1: Run 1
2: Restart
resource
3: Restart with
defaults
4: Restart
processor
See Table 57 0x0C1F
(Bits 0, 1, 2,
3, 4, 10, 11
set)
See Table 57 0
0x0003
0
1760
(55 msec)
set by mfgr
345600000
(180 min.)
0-100% 5.5148
0-100% 0
640000
640000
F
OUNDATION
N/A Read Manufacturer revision number associated with the
resource - used by an interface device to locate the DD
Only
file for the resource.
N/A Read Revision of the DD associated with the resource - used by
the interface device to locate the DD file for the
Only
resource.
N/A Options for controlling access of host computer and
local control panels to operating, tuning and alarm
parameters of the block.
N/A Read The types of hardware available as channel numbers. See
<Ref 20> The supported hardware types are:
Only
SCALAR_INPUT, SCALAR_OUTPUT
E Allows a manual restart to be initiated.
N/A Read Used to show supported resource block options. See
<Ref 20> The supported features are:
Only
UNICODE_SUPPORT, REPORT_SUPPORT,
FAULT_STATE_SUPPORT, SOFT_WRITE_LOCK_SUPPORT,
HARD_WRITE_LOCK_SUPPORT,
MULTI_BIT_ALARM_SUPPORT, and "restart/relink
required"
N/A Used to select resource block options. Default selected
option is "restart/relink required"
N/A Read Identifies the block execution methods available for this
resource. See <Ref 20> The supported cycle types are:
Only
SCHEDULED, and
COMPLETION_OF_BLOCK_EXECUTION
N/A Used to select the block execution method for this
resource.
1/32 Read Time duration of the shortest cycle interval of which the
resource is capable.
millise Only
c
kbyte Read Available configuration memory in the empty resource.
To be checked before attempting a download.
s Only
1/32 Read Minimum time interval specified by the manufacturer for
writing copies of NV parameters to non-volatile
millise Only
memory. Zero means it will never be automatically
c
copied. At the end of NV_CYCLE_T, only those
parameters which have changed need to be updated in
NVRAM.
% Read Percent of memory available for further configuration.
Zero in preconfigured resource.
Only
% Read Percent of the block processing time that is free to
process additional blocks.
Only
1/32 Time duration at which to give up on computer writes to
function block RCas locations. Shed from RCas will never
millise
happen when SHED_RCAS = 0.
c
1/32 Time duration at which to give up on computer writes to
function block ROut locations. Shed from ROut will
millise
never happen when SHED_ROUT = 0.
c
Fieldbus Block Information
October 2016
F Fieldbus Block Information
OUNDATION