Brazil; China - Emerson Rosemount 3051S Series Reference Manual

Product Certifications
October 2016
IG IECEx Intrinsic Safety – Group I - Mining (IG with Special
A0259)
Certificate: IECEx TSA 14.0019X
Standards: IEC 60079-0:2011, IEC 60079-11:2011
Markings: FISCO FIELD DEVICE Ex ia I Ma (–60 °C
Parameter
Voltage U
i
Current I
i
Power P
i
Capacitance C
i
Inductance L
i
Special Conditions for Safe Use (X):
1. If the apparatus is fitted with optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by Clause 6.3.13 of
IEC60079-11:2011. This must be taken into account when
installing the apparatus.
2. It is a condition of safe use that the above input parameters
shall be taken into account during installation.
3. It is a condition of manufacture that only the apparatus fitted
with housing, covers and sensor module housing made out
of stainless steel are used in Group I applications.
N7 IECEx Type n
Certificate: IECEx BAS 04.0018X
Standards: IEC 60079-0:2011, IEC 60079-15:2010
Markings: Ex nA IIC T5 Gc, (–40 °C
Special Condition for Safe Use (X):
1. The equipment is not capable of withstanding the 500 V
insulation test required by clause 6.5 of EN 60079-15:2010.
This must be taken into account when installing the
equipment.
B.8 Brazil
E2 INMETRO Flameproof
Certificate: UL-BR15.0393X
Standards: ABNT NBR IEC 60079-0:2008 + Corrigendum
1:2011, ABNT NBR IEC 60079-1:2009 +
Corrigendum 1:2011, ABNT NBR IEC
60079-26:2008 + Corrigendum 1:2008
Markings: Ex d IIC T* Ga/Gb, T6(–60 °C
T5/T4(–60 °C
Product Certifications

T
a
FISCO
17.5 V
380 mA
5.32 W
0
0
 
T +85 °C)
a
 
T +70 °C),
a
 
T +80 °C), IP66
a
Special Conditions for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for installation

+70 °C)
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
2. For information on the dimensions of the flameproof joints,
the manufacturer shall be contacted.
I2/IB INMETRO Intrinsic Safety/FISCO
Certificate: UL-BR 15.0392X
Standards: ABNT NBR IEC 60079-0:2008 + Corrigendum
Markings: Ex ia IIC T4 Ga, T4(–60 °C
Special Condition for Safe Use (X):
1. The Rosemount 3051S enclosure may be made of aluminium
alloy and given a protective polyurethane paint finish;
however, care should be taken to protect it from impact or
abrasion if located in areas that requires EPL Ga.
Model
SuperModule
3051S...A; 3051SF...A;
3051SAL...C
3051S...F; 3051SF...F
3051S...F...IB;
3051SF...F...IB
3051S ...A...M7, M8, or
M9;
3051SF ...A...M7, M8, or
M9;
3051SAL...C... M7, M8, or
M9
3051SAL or 3051SAM
3051SAL...M7, M8, or M9
3051SAM...M7, M8, or M9
RTD Option for 3051SF
B.9 China
E3 China Flameproof and Dust Ignition-proof
Certificate: 3051S: GYJ16.1249X
Standards: 3051S: GB3836.1-2010, GB3836.2-2010,
Reference Manual
00809-0200-4801, Rev DA
1:2011, ABNT NBR IEC 60079-11:2009

T
U I
i i
30 V 300 mA
30 V 300 mA
30 V 300 mA
17.5V 380 mA
30 V 300 mA
30 V 300 mA
30 V 300 mA
5 V 500 mA
3051SFx: GYJ11.1711X
3051S-ERS: GJY15.1406X
GB3836.20-2010, GB12476.1-2013,
GB12476.5-2013
3051SFx: GB3836.1-2010, GB3836.2-2010,
GB3836.20-2010, GB12476.1-2000
3051S-ERS: GB3836.1-2010, GB3836.2-2010,
GB3836.20-2010

+70 °C), IP66
a
P C L
i i i
1.0 W 30 nF 0
1.0 W 12 nF 0
1.3 W 0 0
5.32 W 0 0
60 H
1.0 W 11.4 nF
33 H
1.0 W 11.4 nF
93 H
1.0 W 11.4 nF
0.63 W N/A N/A
163