Emerson Rosemount 3051S Series Reference Manual page 77

Reference Manual
00809-0200-4801, Rev DA
What alert is
Alert detecting
Mass Flow DP value is negative (and
Transducer beyond a threshold)
Block reverse indicating that flow is in
flow the wrong direction
Mass Flow
DP value is outside of
Transducer
operating range or
Block sensor
sensor limits
out of range
Mass Flow
SP or PT value is out of
Transducer
range and has been
Block SP of
clipped in calculations
PT clipped
Troubleshooting
Effect on Recommended
instrument action
Check DP sensor
Mass Flow PV
configuration
status will go
and trim as
BAD
needed
Check
Engineering
PV status will Assistant (EA)
go has generated
UNCERTAIN configuration for
proper range of
DP values
Check EA has
PV status will generated
go configuration for
UNCERTAIN proper ranges of
SP and PT values.
Help
DP input was so low so flow is reversed
DP input outside of operating range and/or
implementation limits
SP or PT input outside of operating range and limited
(clipped) to operating range in calculations
Troubleshooting
October 2016
Default
configuration
0 = Disabled,
1 = Enabled
Licensed
Licensed
Licensed
67