YASKAWA DX100 Maintenance Manual page 658

Alarm Alarm Name Sub
Number Code
5
6
4608 WRONG 1
EXECUTION OF
GETARG INST
2
3
4609 MEMOPLAY 2
ERROR
5
6
4610 MEMOPLAY 1
SAMPLING
ERROR
Meaning Cause
An error occurred in the operation Software operation
process of job call stack when the error occurred
execution of macro instruction was
cancelled.
Incorrect macro number Software operation
error occurred
The job argument is not set. Setting error
No number of the specified job Setting error
argument
The data types of job argument Setting error
disagreed.
The memory play file was being Setting error
used in another system.
The control group in the memory Setting error
play file did not agree with the
control group of execution job.
An attempt was made to clear the Setting error
memory play file by a CLEAR
instruction before having executed
a MEMOF instruction.
Failed to read the memory play Software operation
sampling data. error occurred
Remedy
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
(1)Check the following settings.
·Check the settings for jobs.
(1)Check the following settings.
·Check the settings for jobs.
(1)Check the following settings.
·Check the settings for jobs.
(1)Check the following settings.
·Check the setting of the used memory play file number.
(1)Check the following settings.
·Check the control group setting of the used memory play file.
(1)Check the following settings.
·Execute the MEMOF instruction, and then execute the CLEAR instruction.
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).