YASKAWA DX100 Maintenance Manual page 207

Alarm Alarm Name Sub
Number Code
0600 MEDAR STATUS
ERROR
0601 MEDAR
DIAGNOSIS
ERROR
0602 MEDAR VERSION
ERROR
0603 MEDAR REVISION
ERROR
0604 MEDAR MODE
CHANGE ERROR
0605 MEDAR
SCHEDULE
TRANSMIT
ERROR
0606 MEDAR ERROR 1
0607 MEDAR ERROR 2
0608 MEDAR WELDER
TYPE MISMATCH
Meaning Cause
YCP01 board failure (1)Turn the power OFF then back ON.
YIF board failure
MADER timer error
MADER timer error
MADER timer error
MADER timer error
MADER timer error
MADER timer error
MADER timer error
MADER timer error
MADER timer error
Remedy
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the YIF01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YIF01 board, and then load
the CMOS.BIN saved before alarm occurred.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.
Refer to the instruction manual for the MEDAR function.