YASKAWA DX100 Maintenance Manual page 104

DX100
7.4
7.4.1 System Monitoring Time Display Window
7 System Diagnosis
7.4 System Monitoring Time Display
System Monitoring Time Display
The status of system operation, e.g. power ON time, can be checked.
1. Select {SYSTEM INFO}.
2. Select {MONITORING TIME}.
– The SYS MONITORING TIME window appears.
1
2
3
4
5
CONTROL POWER TIME
1,
Displays the cumulative time that the main power supply has been
ON.
SERVO POWER TIME
2,
Displays the cumulative time that the servo power supply has
been ON.
PLAYBACK TIME
3,
Displays the cumulative time during which playback was exe-
cuted.
MOVING TIME
4,
Displays the cumulative time that the manipulator was in motion.
OPERATING TIME
5,
Displays the cumulative time spent in operation. For example, if
the manipulator is used for spot welding, it displays the amount of
time spent in spot welding; if the manipulator is used for handling,
it displays the time spent in handling.
7-15