YASKAWA DX100 Maintenance Manual page 282

Alarm Alarm Name Sub
Number Code
65
66
67
Meaning Cause
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the DNS Setting error
server address acquisition process
in the DHCP of the Ethernet
function.
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the Ethernet Setting error
function DNS domain getting
process in the DHCP of the
Ethernet function.
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the SNTP Setting error
server address acquisition process
in the DHCP of the Ethernet
function.
Remedy
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The DHCP server operation
· The network status
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The DHCP server operation
· The network status
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The DHCP server operation
· The network status