YASKAWA DX100 Maintenance Manual page 283

Alarm Alarm Name Sub
Number Code
68
69
70
Meaning Cause
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the IP address Setting error
acquisition process in the DHCP of
the Ethernet function.
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the DHCP Setting error
interface structure object mapping
process of the Ethernet function.
YCP01 board failure (1)Turn the power OFF then back ON.
An error occurred in the DNS Setting error
resolver initialization process of
the Ethernet function.
YCP01 board failure (1)Turn the power OFF then back ON.
Remedy
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The DHCP server operation
· The network status
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The DHCP server operation
· The network status
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
(1)Check the following settings.
· The domain name
· The DNS related settings
· The DHCP server operation
· The network status
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.