YASKAWA DX100 Maintenance Manual page 26

DX100
3 Inspections
3.1
3 Inspections
3.1 Regular Inspections
Regular Inspections
• Do not touch the cooling fan or other equipment while the
power is turned ON.
Failure to observe this caution may result in electric shock or injury.
Carry out the following inspections.
Inspection Inspection Item
Equipment
DX100 Controller Check that the doors
are completely
closed
Check for gaps or
damage to the
sealed construction
Interior circulation Check operation
fan and backside
duct fan
Emergency stop Check operation
button
Enable switch Check operation
Battery Confirm battery
alarm or message is
displayed or not
Power Supply Check power supply
voltage is normal
Circuit Breaker Check falling out,
Lead Cables loosing or breaking
of the lead cables
Check the correlate
voltage
3-1
CAUTION
Inspection
Frequency
Daily
Monthly
As required
As required
As required
As required
As required
As required
Comments
While power ON
While servo ON
In teach mode