Error Code Is Displayed On The Status Menu - Epson WorkForce Pro WF-C879RBAM User Manual

Solving Problems
There are some problems with fax connection and fax settings.
Solutions
Try the resolutions for fax connection and fax settings.

Error Code is Displayed on the Status Menu

If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the
its solution.
Code Problem
001 The product was turned off by a power failure.
101 The memory is full.
102 Collated printing has failed due to a lack of available
memory.
103 Printing quality has been lowered due to a lack of
available memory.
>
The Printer Does Not Work as Expected
button, and then selecting Job Status. See the following table to find the problem and
>
Error Code is Displayed on the Status Menu
Solution
-
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
❏ Select Settings > General Settings > System
Administration > Clear Internal Memory Data
> PDL Font, Macro, and Working Area, and then
clear the fonts and the macros that you have
downloaded.
❏ Try the methods below to reduce the size of the
print job. If you do not want to use these
methods, try printing one copy at a time.
❏ Lower the print quality and the
resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or
fonts used in the print job.
If you do not want to lower the print quality, try the
following methods to reduce the size of the print job.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
256